1～10 item / All 10 items
Standard carrier idler with conventional type stand specifications.
It is an idler that supports the belt on the side that transports the cargo (the carrier side) of a belt conveyor that carries bulk materials such as crushed stone, soil, sand, gravel, ore, and grains.
Carrier idler used for flat transport.
In addition to "bulk items" such as beer cases, cement bags, and grain bags, it can also be used for belt conveyors that transport "loose items" via skirt rubber. It is also compatible with conveyors using corrugated belts and steep incline belts.
Carrier idler with an automatic centering function ideal for adjusting belt waviness and misalignment.
When the belt comes into contact with the guide roller positioned in front of the pivot axis connecting the upper and lower double-structured frame, the frame (F2) pivots within a certain angle range. The resultant force generated at this time, due to the function that returns the belt to the center of the conveyor, allows for adjustments of wandering and misalignment with minimal force applied, resulting in less damage to the belt.
A lightweight and compact carrier idler compared to conventional JIS standard products.
This is a carrier idler that achieves weight reduction and space-saving by reducing the roller diameter and using thinner stand material compared to conventional JIS standard products.
Laura two-tank type carrier idler
This is a Laura two-chamber carrier idler. Its application is similar to that of a standard carrier idler, but it can also be used with conveyors that have slatted belts.
Carrier idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
This is an automatic centering carrier idler with a tapered design based on the JAC type side roller. Due to the larger diameter on the center side of the belt and the smaller diameter on the end side, the difference in surface peripheral speed of the roller during belt contact causes a tracking adjustment. The frame rotates towards the side where the belt is offset, enhancing functionality. It can be used without the need for directional indication and is compatible with both forward and reverse operation conveyors.
Carrier idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
Similar to the JAC-T type, this is a tapered automatic centering carrier idler with side rollers. The principle of the zigzag adjustment function is the same; however, as a structural difference, a pivot axis is placed at the bottom of each roller support on the left and right, eliminating the pivot frame to improve pivot sensitivity. This product can also be used in conveyors for both forward and reverse operation.
A stand-tilting carrier idler that helps reduce "work time" and "risk rate" during roller replacement.
It is an idler that can tilt the stand in the direction of the belt's movement. It helps to reduce "work time" and "risk rate" during roller replacement.
A carrier idler connected by joint links for effective snake prevention.
This is a carrier idler connected by joint links for each roller. Its purpose is similar to that of a standard carrier idler, but it has the function of deforming in response to uneven loads during transport, thereby preventing spillage and belt misalignment.
A lightweight and compact flat carrier idler compared to conventional JIS standard products.
This is a flat carrier idler that achieves lightweight and space-saving by reducing the roller diameter and thinning the stand material compared to conventional JIS standard products.
